NAIM UNITIQUTE - Manual

Also see for UNITIQUTE -: Connection guide Guide Supplement Brochure Brochure Quick start guide

NAIM UNITIQUTE - Manual Manual pdf 15 page image

13UnitiQute SetupIf an incorrect passphrase oraccess key is entered UnitiQutewill display an alert message.Note: As a security measure,a router may also require theUnitiQute’s MAC address to beentered before allowing it to join the wireless network. Thistype of security feature is known as ‘MAC address filtering’.The UnitiQute MAC address is shown in the ‘Factory settings> System Status’ page.Note: The wireless passphrase/access key is created whenthe wireless router is first set up and could be a word or aseries of numbers and letters. If the passphrase/access keyis not known, check on the router settings page or with theperson who initially set up the router.Note: If a router offers multiple security configurations,UnitiQute will automatically offer only the mostsecure one.Note: If WEP security is used the router should be setto “auto” or “open” authentication.If the selected network is insecureand requires no passphrase oraccess key to join, UnitiQute willdisplay an alert message. Pressingthe handset ok/list key willimmediately connect UnitiQuteto the network and display aconfirmation screen.Note: Wireless connection difficulties can sometimes beresolved by changing the wireless connection channel inthe router settings.4.6.2 Non-DHCP (Static) NetworkConnectionIf DHCP is de-selected in theNetwork Settings menu, fivefurther parameters will bedisplayed.Parameter OptionsIP: User definable (numerical entry)Default: 192.168.0.80Mask: User definable (numerical entry)Default: 255.255.255.0Gateway (Gtwy): User definable (numerical entry)Default: 192.168.0.1DNS1: User definable (numerical entry)Default: 192.168.0.1DNS2: User definable (numerical entry)Default: 192.168.0.1These settings enable UnitiQute to connect to a networkusing a fixed IP address. On selecting each one in turn,numerical entry screens will be displayed that requirecompletion with the appropriate network IP addresssettings. Consult your network router’s user documentationfor help with specifying fixed IP address settings.4.7 The Digital Output MenuThe Digital Output setup menuenables the UnitiQute digitaloutput to be switched on and itssignal format configured.Parameter OptionsEnabled: Yes / NoOutput: Native / 96kHz 24bitIf Native is selected, the digital outputformat will reflect the input format. If96kHz 24bit is selected, the output isre-sampled to 96kHz and 24bit resolution.4.8 The Front Display MenuThe Front Display setup menuenables the behaviour ofthe front panel display, logoillumination, clock displayand logo touch-muting tobe modified. The options aretabulated and described in the following section:Parameter OptionsOff During Mute: Yes / NoAuto Off: Select time from listClock When Off: Yes / NoLogo Off: If Muted / If Display Off / Always / NeverLogo Mute: Yes / NoWhen Off During Mute is selected the front panel displaywill switch off when mute is engaged. Auto Off defines thelength of time the display will remain switched on afterthe last interface operation is carried out. Time periods ofbetween 10 seconds and 1 hour can be selected.Note: If the display has been switched off using thehandset disp key this setting will take priority over the AutoOff setting. The display will always switch on briefly whencontrol commands are received.The Clock When Off settings enables the clock to remaindisplayed when other display settings are switched off.Note: If Clock When Off is set to “Yes” and Logo Off is setto “If Muted”, the clock display will dim automatically 10seconds after mute is selected.The Logo Off settings select the circumstances in whichthe front panel logo illumination will switch off. Logo Mutesettings engage or disengage the touch-mute function ofthe front panel logo.Digital Output 1/24Enabled: NoOutput: NativeFront Display 1/54Off During Mute: NoAuto Off: 2 minsClock When Off: YesLogo Off: If MutedNetwork Settings 1/54IP: 192.168.0.80Mask: 255.255.255.0Gtwy: 192.168.0.1DNS1: 192.168.0.1This wireless network isinsecure and requires nopassphrase or access key.Press OK To ConnectCan’t LoginPress OK To Re-Try