10-410.2 Installing GTWINProcedure for installing GTWIN in a personal computerGTWIN is installed in a personal computer using the procedure outlined below.1. Exit any applications currently running.If there are any applications currently running, exit them.2. Insert the setup CD.Insert GTWIN setup CD in the CD drive.3. Select “Run”.Click on the “Start” button at the lower left of the screen, orpress the Ctrl + ESC keys to display the Windows menu. Select“Run”.4. Enter the name of the file on which the function is to be run.When “Run” is selected, the dialog box shown atthe left is displayed. Enter:e:\setup.exeand click on the [OK] button.Note) The drive in which the CD is installed may be called by a name other than “e”, depending on thecomputer configuration.Note:• In order to use GTWIN, Windows 95 (OSR2 (Ver. 4.00.950B) or higher), Windows 98, Windows Me,NT (Ver. 4.0 or higher), 2000 or XP must be installed in the computer.• The computer in which GTWIN is being installed must have at least 50 Mbyte of hard disk spaceavailable.• The above explanation assumes that Windows is installed in the C: drive and that the CD drive is theE: drive. If you drives are configured differently, or if you are installing the program over a network,enter the appropriate drive name for your configuration.
