4-44.1.3 Connecting to the TOOL port of FP2 / FP2SH (1) (Direct Connection toGT01)Connecting to the TOOL portReference: <4.1.15 How to Make Communication Settings Using the FPWIN GR>PLC communication cable: Mini-DIN 5-pin loose-wire cable (AIGT8142)Connecting to the FP2/FP2SH TOOL portNote:• Keep the cable no longer than 3 m.• When supplying power from the TOOL port, verify whether or not it will be possible by using themethod of calculation for the number of expansion units that is provided in the hardware manual.
