7167 Owner’s Manual Appendix A: SpecificationsNovember 2003254Thermal Receipt Station Slip StationSlew Speed 6.7 Inches per Second 4.0 lines per SecondPrint Zone 2.83 Inches Maximum 3.23 Inches MaximumNoise 57 dBA Sound Pressure (ISO 7779) 62 dBA Sound Pressure (ISO 7779)Graphics (Optional) User-Defined Graphics, Logo User-Defined GraphicsOther No Reverse Paper Feed Reverse Paper FeedTwo Form in SensorsThermal Receipt Station Impact Slip StationPaper Diameter 80 mm Max. Not ApplicablePaper Length 83 Meters (273 feet) Side Insertion: 2.0 Inches (Min.)Front Insertion: 2.75 Inches (Min.)Paper Width 80 mm ± 1mm(3.15 Inches ± .02 Inches)Side Insertion: 8.0 Inches (Min.)Front Insertion: 2.0 Inches (Min.)Paper Thickness Not Applicable .406 mm (.016 Inch)Printable Area 2.83 Inches (Max.) 3.22 Inches (Max.)Power RequirementsThe 7167 printer receives power from a separate power supply. Here are the voltagerequirements for the power supply.Maximum CurrentVoltage Station Short Term Long Term24.0 V ± 10% Slip 4.6 Amps 3.15 AmpsReceipt 6.5 Amps 3.15 AmpsEnvironmental ConditionsOperating Temperature 5°C to 45°C (40°F to 112°F), models with knife5°C to 50°C (40°F to 120°F), models with no knifeOperating Humidity 5% to 90%Condensation may occur when equipment is transferred from cold towarm areas after shipment. The printer's design permits operation afterdrying out and stabilizing at room temperature.
