7167 Owner’s Manual Chapter 4: DiagnosticsNovember 2003 56Configuring the PrinterUse the Configuration Menu to select functions or change various settings as indicated inthe preceding sections. The Configuration Menu prints instructions and setting optionsinteractively as the user goes through the configuration process.Caution: Be extremely careful in changing any of the printer settings to avoid changingsettings that might affect the performance of the printer.1. Set DIP Switch 2 to Off, Switch 1 to On.2. Reset the printer.For resetting the printer instruction see Chapter 2 page 13This configuration menu allows you to set mechanical adjustment parameters and selectprinter test.Sub-menus are entered and selections are made using the Paper Feed Button.- Short Click: Feed Button is quickly depressed and released- Long click: Feed Button is held down more than 1 secondPress the paper feed for the configuration you want.Defaults are marked with asterisk (*).******** Main Menu ***************************************Select a sub-menu:- EXIT -> 1 Click- Print Current Configuration -> 2 Clicks- Set Communication Interface -> 3 Clicks- Set Diagnostics Modes -> 4 Clicks- Set Emulation/Software Options -> 5 Clicks- Set Hardware Options -> 6 Clicks- Set Default Code page -> 7 Clicks- Set EEPROM To Default Settings -> 8 ClicksEnter code, then hold Button DOWNat least 1 second to validateBottomCover
