NCR 7882 Installation And Owner's Manual

NCR 7882 Installation And Owner's Manual Manual pdf 14 page image

7882 Scanner Installation and Owner Guide04/01 497-0419630 Release D14 of 58Making Other Program ChangesIf you still need to make program changes after setting the communication parameters,you can enter information directly from the Programming Worksheets. TheProgramming Worksheets, located at the back of this book, identify all the availableprogram parameters. Each worksheet relates to a specific programming mode. Mostprogramming options have defaults, identified by a heavy box, that are determined atthe factory. Scanning the Default tag as the first tag after applying power to the 7882sets the parameters to these values.Changing the 7882 program is accomplished by scanning the proper sequence ofprogramming tags, which are included with the unit. Following are three major stepsfor making program changes.1. Enter the Base Programming State by scanning the Programming Mode tag as thefirst tag after applying power to the 7882.2. Select a Programming Worksheet and enter its parameter data by scanning theappropriate Hex tags.3. Save the program by scanning the Save and Reset tag.Note – In most instances the factory determined defaults are the correct parametersetting. However, if you do need to make changes, it is recommended that you first setall parameters to default values, then make any necessary changes to the appropriateparameters.