NComputing L130 User Manual

Also see for L300: User manual User manual User manual Evaluation guide User manual

Contents

NComputing L130 User Manual Manual pdf 11 page image

NComputing L-Series User Manual rev.05.07.12Page 11 of 95Host SetupSystem RequirementsStarting with vSpace 6.5, the maximum number of L-Series users is increased to 100. However thenumber of users, intended application suite and overall performance expectation will ultimatelydetermine how powerful a computer must be used in order to deliver the desired multi-user experience.The tables below give recommended specifications for a vSpace host computer running a typicalapplication set, based on the number of users and type of access device. NComputing recommends youalways test your environment in advance of deployment to ensure it meets your expectations.Recommended Host Hardware Configuration (L300)HostConfigurationsNumber of Users11-10 10-20 20-30 30-50 50-75 75-100CPU*(minimum orequivalent)Intel™ Core2 QuadIntel Core™i7Intel Corei7 Intel Core i7 Dual Xeon™ Dual XeonMemory (32-bitOS) 4 GB 4 GB 4 GB NA 2 NA 2 NA 2Memory (64-bitOS) 6 GB 8 GB 12 GB 16 GB 24 GB 24 GB1 The number of users that your installation will support depends upon the host's configuration andyour end-users’ performance expectations. Performance results are highly dependent upon theindividual host hardware, memory, applications being used, OS and network conditions within anyLAN. Host requirements will vary, please test your multi-user environment before deployment.2 32-bit operating systems are not supported with this number of users.For additional sizing guidelines refer to the following Knowledge Base articles:• Scaling vSpace Deployments• Deployment Checklist.For Microsoft OS licensing information see the paragraph on page 3 andwww.ncomputing.com/mslicensingFor each L-series device you will need:• Keyboard and mouse (USB)• Monitor• A category 5/6 network cable to connect to your existing Ethernet network• Optional: speakers, headphones, microphones and USB peripherals