NComputing L-Series User Manual rev.05.07.12Page 31 of 95Using Your L130 and L230 Access DevicesThe available connection list shows the vSpace hosts to which the device can connect. Select ahost from the list and click on the "Connect" button to start.The "Refresh" button refreshes the available connection list.The Options MenuThe "Options" button brings up a menu where you can view and change the access device'ssettings.Within the “Options” screen, the "Reset" button resets the access deviceThe "Info" button brings up a window to view the following information about the access device:• Version: the version of firmware running on the access device• Build: The build number of the firmware running on the access device• Date: The date of the firmware running on the access device• Device Model: The model number of the access device• Loaded Schema Version: The schema version running on the access device• IP Address: The IP address the access device is configured to use• Gateway: The IP gateway the access device is configured to use• MAC Address: The MAC address of the access device• Serial Number: The serial number of the access device• Alias: The alias of the access device, defined using the vSpace admin console• "Loaded from . . .": How the access device loaded its latest firmware update.
