NComputing L130 User Manual

Also see for L300: User manual User manual User manual Evaluation guide User manual

Contents

NComputing L130 User Manual Manual pdf 64 page image

NComputing L-Series User Manual rev.05.07.12Page 64 of 95NComputing vSpace Server 6Management Console GuideBefore beginning, make sure you’ve downloaded and installed the latest version of vSpace for yourselected operating system. For the purpose of this document we will be using vSpace 6 in conjunctionwith the L300 and L300 access devices. Older versions of vSpace may contain variations in consolelayout and features, but many of the same concepts and terms will apply. While certain examples givenherein highlight the L-series specifically, it should be noted that the L-series and M-series share nearlyidentical configuration options.1.1 Installing vSpaceBegin by going to www.ncomputing.com/softwaredownload and downloading the latest version ofvSpace. Once the download is complete, launch the vSpace installer and proceed through the guidedinstall process. Be sure to reboot your host once the installation process is complete.1.2 Registering vSpaceOnce vSpace is installed, register the host software byright-clicking on the NComputing icon in your system trayand selecting “vSpace Registration,” as shown in the imageto the right.This will launch the Registration Utility and you will beguided through the remainder of the registration process.1.3 Connecting Your DevicesvSpace is now ready to accept connections from L and L-series devices. Keep in mind that, by default,your devices will automatically look for vSpace hosts on their designated subnet. You can alter thisbehavior from the devices themselves or from within the NC Console (6.4 Connections Tab) at any time.Depending on your selected operating system, further configuration steps may be required for the OSitself (such as adjusting Local Policies or User Groups). Be sure to review our general deploymentchecklist to ensure that your environment is properly configured to facilitate device sessions.http://www.ncomputing.com/kb/NComputing-L-series-Deployment-Checklist_309.htmlOnce they have connected and received a session, you should register and update your device firmware(6.1 L-seriesUpdate Tab) as soon as possible.