NEC 920 Owner's Manual

NEC 920 Owner's Manual Manual pdf 13 page image

-6-OPERATION OF THE PHONE1) Press the PWR key and hold it for at least 2 seconds.The phone will carry out a short self-test sequence, thenbriefly display an all “8” pattern.2) When the RSSI Indicator appears on the display, thephone is ready for use.If NO SVC appears it means that you are outside the cellularservice area and the network cannot serve you.A cellular phone can only send and receive calls when itis switched on.3) Press the PWR key and hold it for at least 2 seconds toswitch the phone off.PLACING A CALLFor optimum performance, fully extend the antenna beforesending or receiving a call.Note: Push in the antenna when you are not using thephone.You can use the phone without extending the antenna in agood coverage area.1) Key in the number (include the area code if you'remaking a long distance call).If you make a mistake, press the CLR key to delete the lastkeystroke; or to clear the whole display, press and hold theCLR key.2) The number will appear on the display.3) Press SND.4) The IN USE indicator will appear, and the number willdisappear from the display.5) Lift the phone to your ear, and wait until your call isanswered.