NEC DT820 User Manual
Also see for Univerge DT820: Quick install guideQuick reference guideReference sheetUser guideQuick user guide
                                                                                                                                      | |
Contents
| 
92Holding CallsSystem Hold –With a call in progress:1. Press Hold.Exclusive Hold –With a call in progress:1. Press the Exclusive Hold key (Service Code751:45).-OR-Press the Feature key then Hold key.Note 1: To retrieve a held call, press the flashing Linekey or ICM key (Internal calls).Note 2: Calls on System Hold can be retrieved fromany multiline terminal with the held lineappearance.Note 3: After a preprogrammed time, the held call willrecall to the originating station.Transferring CallsUsing Manual Dial –With a call in progress:1. Press the Transfer key.2. Dial the station number.3. Announce the call (optional).4. Replace the handset.Using Direct Station Selection (DSS) –With a call in progress:1. Press the Transfer key.2. Press the programmed DSS.3. Announce the call (optional).4. Replace the handset.Note 1: If the called station is busy, replace thehandset to initiate a camp-on. Unansweredcamp-on calls and unscreened transfers willrecall to the transferring station.Note 2: To return to the original party, press theflashing Line key or Conf key.Note 3: A Programmable Function Key may beassigned for DSS.Note 4: To transfer a call directly to a personal voicemailbox, dial 8 after dialing the stationnumber.HOLD STA 123456782-13 WED 5:40PMVMsg InPg ExPg HOLD STA 123456782-13 WED 5:40PMVMsg InPg ExPg |
Related manuals for NEC Univerge DT820
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine