102MULTILINE APPEARANCETo Originate a CallSTEP 1: Press the MULTILINE APPEARANCE fea-ture key.STEP 2: Lift handset or press key. Dial theCentral Office access code (i.e.9 (US), 0(Aust)).STEP 3: Dial the desired number.To Answer a CallSTEP 1: Press the MULTILINE APPEARANCE fea-ture key (ringing and flashing LED alert userto incoming call).STEP 2: Lift handset or press key.STEP 3: Speak with incoming party.TO HOLD A CALLSTEP 1: Press key. Held line wink flashes.To RetrieveSTEP 1: Lift handset or press key.STEP 2: Press held line. Use handset to converse.If unansweredSTEP 1: After preprogrammed time, Automatic Recallis initiated.STEP 2: Visual and audible signal (rapid flash and ringburst) is sent to station that placed call onhold.DT830 DT430/410SpeakerSpeakerNote: If held line appears on other DT Series stations,the associated LED flashes red slowly.Note: Any station with this line appearance can retrievethe call.Note: Hold shows as a flashing green LED on yourphone. The same line on other phones shows asa flashing red LED. Recall shows as a flashinggreen LED on your phone and flashing red LEDon other phones with the same line.DT830 DT430/410HOLDMic >>>Held Station Number2001HOLD1:25 PM MON 22 SEP 2014Speaker
