NEC Direction SP E-Series Reference Manual

Also see for Direction SP E-Series: User guide

Contents

Option Installation 3-5Aligning the Tabs3. Slide the access cover forward to meet the front panel.4. Tighten the thumb screw.Note: The cover fits tightly. If it does not slide all theway to the front panel, place one hand on the front of theunit while you slide the cover forward from the rear.5. Reconnect all external peripherals.6. Plug in power cables.Expansion BoardsYour computer’s system board features several expansion slots that canaccommodate accessory adapter boards, such as a network board. Depending onthe system you purchased, some of these devices may be installed in yoursystem.The Direction SP E-Series supports ISA Plug and Play expansion boards withone ISA slot. Plug and Play allows the installation of a board in an expansionslot without changing the hardware settings. There are no system resourceconflicts to resolve. Plug and Play automatically configures the board for thesystem.Industry-standard 8-bit and 16-bit ISA, and 32-bit PCI expansion boards aresupported in the system unit. ISA expansion boards can be Plug and Play ornon-Plug and Play boards.