NEC Direction SP E-Series Reference Manual

Also see for Direction SP E-Series: User guide

Contents

Option Installation 3-114. To install a DIMM, align the module with an empty socket. Make sure thatthe notches on the DIMM line up with the keys in the sockets.5. Insert the DIMM into the socket. Close the plastic clips at both ends of thesocket.Installing a DIMM6. Replace any cables or boards that may have been removed.7. Replace the access cover.Data Storage DevicesThe system board in your computer supports the following storage devices: two diskette drives, including the standard 1.44-MB diskette drive and atape backup unit up to four IDE drives.Device SlotsYour computer has seven storage device slots: a 3.5-inch accessible device slot (contains the standard 1.44-MB diskettedrive) two internal 3.5-inch hard drive slots (one contains the hard drive) four accessible device slots two accessible 5.25-inch device slots (one contains the standardCD-ROM/DVD drive) two 3.5-inch device slots; the lower 3.5-inch slot is not accessible onthe desktop model.