2-14 Setup Utility Clear All DMI Event LogsThis option clears the DMI Event Log after rebooting the system. Choose “No”or “Yes.” Event LoggingThis option enables logging of DMI Events. Choose “Disabled” or “Enabled”(default). Mark DMI Events as ReadThis option is used to mark off all DMI Events as read. If necessary, press theEnter key to access the Confirmation dialog box and confirm your preference.To return to the Advanced Menu, press the Esc key. Then press the right arrow (cursor)key to move to the Security Menu.SECURITY MENUThe Security Menu can be used to set a user password and/or a supervisor password.A User Password controls access to the system and Setup Utility program at boot up. If theUser Password feature has been enabled, you need to enter your User password correctlywhenever you boot the system before you can use it.A Supervisor Password controls access to the BIOS and Setup Utility program. If theSupervisor Password feature has been enabled, a Supervisor password must be enteredcorrectly before all options in the Setup Utility program are available (for example, todisable password protection).Press the right arrow (cursor) key to move to the Power Menu.POWER MENUThe Power Menu can be used to enable or disable the system’s power managementfeatures. When the power management option is enabled, the following options appear inthe Power Menu: Inactivity TimerThe Inactivity Timer lets you set the delay time for activation of powermanagement. Standby mode powers down various devices in the system until youresume using it. You can select from “Off,” “1,” “2,” “4,” “6,” “8,” “12” or “16minutes.” A setting of1 minute achieves maximum power savings, while a setting of 16 minutes allowsmaximum performance.
