Installing and Using Utilities 6-33Error MessagesMessage ActionUpdate isn't necessary. The firmware is in up-to-date state.Illegal data. The data is not for the target device.Update the firmware with the data of the target device.BMC information can't be acquired. Check if the remote management card is correctly installed.Update the firmware after making sure that the card iscorrectly installed.Cannot enter the online mode.Failed to save the current data.Cannot enter the update mode.An error was occurred while data isbeing updated.Termination process failed.BMC is possibly in Busy state.Try again several minutes later.The IPMI Driver not found. Install the IPMI driver.BMC is not supported. The BMC does not support the update function. Updating bythis tool is unavailable.IMPORTANT: If updating still fails, contact your servicerepresentative.
