Troubleshooting 8-3LAMPSThe following describes lamps on the server and their indications. See Chapter 2 for each location.POWER/SLEEP LampThe green POWER/SLEEP lamp lights to indicate normal operation while the server is powered.When the server is off-powered, the POWER/SLEEP lamp stays unlit.The POWER/SLEEP lamp indicates that the server is running in the power-saving mode (sleepmode). If the OS supports the power-saving mode such as Windows 2000, pressing thePOWER/SLEEP switch blinks the POWER/SLEEP lamp in green and places the server in thepower-saving mode. Press the POWER/SLEEP switch to turn out the POWER/SLEEP lamp andplace the server back in the normal mode.The power-saving mode is only available when the OS supports the power-saving feature. SomeOS's allow you to set the server to automatically turn in the power-saving mode when no access ismade to the server for a certain period of time or to select the power-saving mode with a command.Access lampPOWER/SLEEPlampDisk access lampLINK/ACTlamp1000/100/10lampFRONT REARAccess lamp
