3-12 Configuring Your SystemSystem Hardware MenuFeatureChoices orDisplay Only Description Your SettingThermal Sensor Refer to Thermal SensorSubmenu.Wake On Events Refer to Wake On EventsSubmenu.AC Link Power OnLast StateStay OffDetermines the mode of ACLink.ESM IRQ DisabledIRQ5IRQ10IRQ11Determines routing of the ESMinterrupt.Error LogInitializationPress Enter Request to initialize the ErrorLog now.If Clear OK, then display"System Event Log Cleared!"If Clear NG, then display"System Event Log NotCleared!"ConsoleRedirectionAdditional setup menu toconfigure console.The Boot-Time diagnosticscreen is enabled if redirectionis enabled.Thermal Sensor SubmenuFeatureChoices orDisplay Only Description Your SettingThermal Sensor EnabledDisabledWhen enabled determines ifthe BIOS will disable boot (iftemperature is not within asafe range).Upper Limit 50 Sets the upper temperaturelimit in centigrade.Lower Limit 5 Sets the lower temperaturelimit in centigrade.Wake On Events SubmenuFeatureChoices orDisplay Only Description Your SettingWake On LAN EnabledDisabledEnables Wake ON LANsupport.Wake On Ring EnabledDisabledEnables Wake ON Ringsupport.
