NEC EXPRESS5800/120Ed User Manual

Contents

4-12 Upgrading Your System8. Orient the heat sink as shown in Figure 4-10 and install the thermal tapesquare onto the heat sink in the exact position shown.Figure 4-10. Installing Thermal Tape9. Position the heat sink above the processor so the thermal tape squareattached to the bottom of the heat sink is directly positioned above theprocessor.! CAUTIONWhen performing the next three steps, be sure the heat sinkis held firmly in position. If the heat sink should slide acrossthe top of the processor, the thermal tape may be damaged.10. Position the heat sink clip over the center of the heat sink and attach thesmall end of the clip to the tab located on the base of the ZIF socket. SeeFigure 4-11, A.AFigure 4-11. Positioning the Heat Sink Clip11. Insert a flat blade screwdriver into the tab of the retention clip.12. Secure the clip onto the tab of the ZIF socket.