NEC Express 5800 User Manual

Also see for Express 5800: Service guide User guide User guide User guide User guide

Contents

4-10 Procedures after Completion of InstallationOperation EnvironmentNEC ESMPRO Agent can be operated in the hardware and software environments shown below. Hardware• Installation system NEC Express5800/ft series• Memory Memory capacity required to operate OS +25.0 MB or larger• Empty capacity of harddisk50.0 MB or larger Software Windows Server 2003, Windows 2000Preparation before SetupBe sure to read the following description before system installation or setup.To operate NEC ESMPRO Agent, you need to make settings of TCP/IP and the SNMP of componentsassociated with TCP/IP.TCP/IP SettingSee the Help started from the Start menu for how to set TCP/IP.SNMP Service SettingTo install the SNMP Service:1. Open [Add/Remove Programs] in [Control Panel].2. Click [Add/Remove Windows Components].3. Select [Management and Monitoring Tools] in the Windows component wizard and click the[Details...] button.4. Check the check box of [Simple Network Management Protocol].5. Click the [Next] button.The file copy operation is started.6. After the file copy is finished, click the [Finish] button.To change the settings of the SNMP Service:1. Double-click [Administrative Tool] in [Control Panel].2. Start [Services] in [Administrative Tool].