NEC Express5800/320Fc-LR/MR Setup Manual

Contents

NEC Express5800/320Fc-LR/MR Setup Manual Manual pdf 117 page image

Troubleshooting 6-7To write data to a dynamic disk, settings described in “Cautions for using theWindows Recovery Console” in “System Repair” need to be configured inadvance. For details, see “Cautions for using the Windows Recovery Console”in “System Repair.”Updating the SystemIMPORTANT:NEC Express5800/320Fc system is a precision instrument. You should ask maintenance personnelto update the system.You will need to update the system after you repair the system using Recovery Console.IMPORTANT:Make sure to follow the steps below when you have restored the system by using RecoveryConsole.Check the configuration for OS Boot Monitoring function.If [OS Boot Monitoring] selected in [Monitoring Configuration] of [Server] is not set to“Disabled”, disable it. See “Step 3: Disable OS Boot Monitoring Function” (page 4-9) fordetails.When updating the system, considerations on settings of Power and Screen Saver are required.If the following settings are enabled when updating the system, the process may stop or thesystem update may not be applied properly. Disable the settings by clearing the checkboxesbefore updating the system. Reconfigure the following settings as necessary afterwards.- Settings of Screen Saver- Power Schemes (Turn off monitor, Turn off hard disks)- Hibernation (enable Hibernation)1. Log on to the system with OS installed as user with Administrative account.IMPORTANT:Check that the dual system is configured properly (Confirm that the STATUSLED 2 onthe CPU/IO module illuminates green. See page 4-7 for location of the STATUSLED).