NEC Express5800/320Fc-LR/MR Setup Manual

Contents

NEC Express5800/320Fc-LR/MR Setup Manual Manual pdf 19 page image

Before Using 1-5Use of Power Supply and Power CordDo not handle power plugs with a wet hand.Do not plug/unplug power cords with a wet hand. There is a risk of an electric shock.Do not connect the ground wire to a gas pipe.Never connect the ground wire to a gas pipe. There is a risk of a gas explosion.CAUTIONDo not plug the cords in nonconforming outlets.Use wall outlets with specified voltage and power type. There is a risk of a fire orcurrent leakage.Avoid installing the server where you may need extension cords. If the cords do notmeet the power specifications, there is a risk of overheating that could lead to a fire.Do not plug too many cords in a single outlet.If the rated current is exceeded, there is a risk of overheating that could lead to a fire.Do not plug the cords insecurely.Insert the plug firmly into an outlet. There is a risk of heat or fire due to poor contact. Ifdust settles on the slots and it absorbs moisture, there is also a risk of heat or fire.Do not use nonconforming power cords.AC cord is to spend the thing of the next specifications:You also have to observe the following prohibitions to prevent an electric shock or firecaused by damage to the cords. Do not pull on the cords. Do not pinch the cords. Do not bend the cords. Keep chemicals away from the cords. Do not twist the cords. Do not place any object on the cords. Do not use cords as bundled. Do not alter, modify, or repair the cords. Do not staple the cords. Do not use any damaged cord. (Replace it with a new one of the samespecifications. For replacement procedures, contact your sales agent.)