NEC Express5800/R120h-2M Maintenance Manual

Contents

NEC Express5800/R120h-2M Maintenance Manual Manual pdf 213 page image

2. List of Windows Event LogsExpress5800/R120h-1M, R120h-2M Maintenance Guide 213Chapter 3 Appendix2. List of Windows Event LogsOSEvent LogIDSource Type Message (Description)Timing when an event is logged ActionAll Windows OSSystem Event Log51Cdrom Warning Error detected on the device \Device\CdRom0 during the pagingoperation.When installing an OS This event may be registered in the event viewer, but this does not affectsystem operation.56Application Popup ErrorThe SCSI device driver returned an invalid ID for a child device(XXXXXX).* This event can be displayed as follows, but this does not affect thesystem operation. The ID can be different depending on yourenvironment." The description of event ID 56 from the source "Application Popup"cannot be found. The component which causes this event is not installedon the local computer or the installation is damaged. Install thecomponent on the local computer or repair it.If the event occurs on another computer, you must save the displayedinformation with it.The event contains the following information:SCSIXXXXXXThe message resource is present, but the messages can not be found instring table or message table.When starting systemThis event can be registered in the system, which multiple RAIDcontrollers and SAS controllers are connected to, but this does not affectthe system operation.129SmartDQa Warning Reset was issued to the device \Device\RaidPort(x).(x is any number)While the system is running If this message has been registered as a log during heavy I/O, there is noproblem since the OS has succeeded in retry. Continue using.129SmartPqi Warning Reset was issued to the device \Device\RaidPort(x).(x is any number)When running the systemEven if the message is registered in the log, there is no problem becausethe OS has successfully completed the retry. you don't need anychanges.