7. Resetting and Clearing the ServerExpress5800/R120h-1M, R120h-2M Maintenance Guide60Chapter 1 Maintenance7.3 Initialization of System Configuration InformationDescription on the Features of System Maintenance Switch7.3.1Here we describe the features of system maintenance switch of the server.Table: Detailed Features of System Maintenance SwitchPosition Default Configuration FeaturesSW1 *1, *5 OFF OFF Set to OFF usually.ON Set the security of iLO5 to disabled.SW2 OFF Reserved －SW3 OFF Reserved －SW4 OFF Reserved －SW5 *2, 5 OFF OFF Set to OFF usually.ON Clears power-on password and administrator password.SW6 *3, *5 OFF OFF Set to OFF usually.ON Set the system configuration back to the default values. *4SW7 OFF Reserved －SW8 OFF Reserved －SW9 OFF Reserved －SW10 OFF Reserved －SW11 OFF Reserved －SW12 OFF Reserved －Important Do not change the system maintenance switch that says “Reserved” unlessit is instructed by the document. It may cause the trouble or malfunction ofdevice.*1 Set SW1 to ON in the following cases.・When the passwords of all the users which administrator authority is given of iLO5 have become unknown・When you change the feature of iLO5 from disabled to enabled*2 Regarding the operation procedure of SW5, see Chapter 2 (7.3.4 Clearing a Password) of this document.*3 Regarding the operation procedure of SW6, see Chapter 2 (7.3.3 Set the System Configuration Back toDefault Values).*4 Default values may be different from the factory preset.*5 When you set SW1, SW5, and SW6 to ON at the same time, boot with the backup ROM.
