4. GlossaryExpress5800/R120h-1M, R120h-2M Maintenance Guide228Chapter 3 Appendix4. GlossaryTerms DescriptionAHS Active Health System (AHS) monitors the status/configuration of the server, and records itto a log file if any changes occur. AHS log is used for maintenance to investigate thefailure.AMP Advanced Memory Protection (AMP) is a technology for realizing a fault tolerance of theserver by memory redundancy (such as mirroring).AMS Agentless Management Service (AMS) is an OS service for sending information (such asOS events) that iLO cannot collect directly. iLO records the information recieved by AMS,and send it to Agentless Management.EXPRESSBUILDER Software for setting up the server. EXPRESSBUILDER can be started by pressing key during POST.Express Report Service Software that can report the server failure to the contact center by E-mail or modem. Thissoftware is installed with NEC ESMPRO ServerAgentService to the server.Express Report Service (HTTPS) Software that can report the server failure to the contact center by HTTPS. This softwareis installed with NEC ESMPRO ServerAgentService to the server.Hexalobular A type of screw head characterized by a 6-point star-shaped pattern. This is often calledas "Torx" (the Torx is a third party’s trademark). Head sizes are described from T1 toT100. This is sometimes abbreviated as 6lobe.iLO A built-in controller that supports the IPMI version 2.0 protocol. The controller is called asiLO5 because this server adopts a generation 5 version controller.NEC ESMPROServerAgentServiceSoftware for monitoring the server. This works with NEC ESMPRO Manager. You canchoose Service Mode or Non-Service Mode when installing this software. Service Moderesides as the OS service and Non-Service Mode does not use the OS service to reducememory, CPU power, and other OS resources.NEC ESMPRO Manager Software for managing a number of servers on network.PC for Management A computer for managing the server on network. A general Windows/Linux computer canbe used as "PC for Management".Product Info Collection Utility Software for collecting several hardware/software statuses and event logs. You can easilycollect the data for the server maintenance by using this software.RAID Report Service This service monitors the RAID status and notifies failures.RBSU ROM-Based Setup Utility (RBSU) is a built-in utility that can configure connected devicesand BIOS settings. RBSU is called from System Utilities.RESTful Interface Tool A tool that supports API based on Representational State Transfer (REST) architecture.You can send maintenance commands in JSON format to iLO by HTTP protocol afterinstalling this tool.SID System Insight Display (SID) is an optional product that can indicate the statuses of eachdevice on motherboard.SPP Standard Program Package (SPP) is a software package that includes BIOS, FW, driver,and other basic software. SPP is included in Starter Pack.SSA Smart Storage Administrator (SSA) is a utility that can configure RAID arrays. SSA isprovided for Windows/Linux and can also start from F10 key function.Starter Pack A software package that includes SPP, instruction manual, application, and other softwarefor the server. This must be installed before using OS on the server. Starter Pack isprovided as an optional product and ISO data on our website.System Maintenance Switch A DIP switch on motherboard. This switch can enable/disable initialization, password, iLOsettings, and other functions of maintenance.System Utilities System Utilities is a built-in utility that provides system information, calling RBSU,collecting system log, and other system utilities. You can start System Utilities by F9 keyduring POST.TPM Kit An optional product of Trusted Platform Module for the server.
