3. EXPRESSSCOPE ENGINE 3Express5800/T110i User’s Guide112Chapter 3 Setup3. EXPRESSSCOPE ENGINE 33.1 OverviewEXPRESSSCOPE Engine 3 provides a variety of features using BMC (Baseboard Management Controller),which is a system management LSI.See EXPRESSSCOPE Engine 3 User's Guide for detailed information.EXPRESSSCOPE Engine 3 monitors the power supply unit, fans, temperature, and voltage of the server. If youhave the management LAN port connected to the network, you can remotely perform the following over a webbrowser or SSH client: Manage the server Remotely control the keyboard, video, and mouse (KVM)* Remotely access a CD/DVD/floppy disk/ISO image/USB memory*.* To enable this feature, the optional license for remote management (N8115-04) is required.To actualize these functions, virtual USB mass storage (Remote FD, Remote CD/DVD, Remote USB Memory,or Virtual Flash) is always connected as USB mass storage.Important This server does not support the Memory Throttling feature.3.2 EXPRESSSCOPE ENGINE 3 Network ConfigurationTake the steps below to use EXPRESSSCOPE Engine 3 through the Web browser.Run POST following Chapter 3 (1.1.1 POST sequence). Wait until the following message appears on1.the lower left of the screen.Press SETUP, Internal Flash Memory, ROM Utility, NetworkPress the key while the message is being displayed to launch ROM Utility.2.Select your keyboard type on Keyboard Selection screen.3.
