3. GlossaryExpress5800/T110i User’s Guide 123Chapter 4 Appendix3. GlossaryTerm DescriptionBIOS Setup Utility (SETUP) Software for setting BIOS. You can run this software by pressing key duringPOST.BMC Baseboard Management Controller (BMC) is a built-in controller that supports the IPMIversion 2.0 protocol. BMC can manage the server hardware.BMC RESET Switch A switch for resetting the BMC of the server. This resets the BMC without clearing theBMC settings.Use the switch if the problem on the BMC occurs.DUMP Switch A switch that is used for collecting the memory dump if an error occurs. You can specifythe destination of the dump by using the Windows function.EXPRESSBUILDER Standard software for setting up the server easily. This also includes several usefulapplications and instruction manuals.EXPRESSSCOPE ENGINE 3 A name of BMC for NEC Express5800 series.EXPRESSSCOPE Profile Key A removable flash memory that stored the settings of BIOS and BMC. If themotherboard of the server is replaced, you can use former settings when moving thisflash memory from the former motherboard.Express Report Service Software that can report the server failure to the contact center by E-mail or modem.This software is installed with NEC ESMPRO ServerAgentService to the server.Express Report Service(HTTPS)Software that can report the server failure to the contact center by HTTPS. Thissoftware is installed with NEC ESMPRO ServerAgentService to the server.Express Report Service (MG) Software that can report the server failure to the contact center by E-mail, modem orHTTPS without NEC ESMPRO ServerAgentService. This software is installed with NECESMPRO Manager to "PC for Management".ExpressUpdate A feature for updating BIOS, firmware, driver, or software of the server. This feature isavailable when NEC ESMPRO Manager cooperates with EXPRESSSCOPE ENGINE 3and ExpressUpdate Agent.ExpressUpdate Agent Software for performing ExpressUpdate. This is installed to the server.Flash FDD An optional USB device that can use as a floppy disk drive.Internal Flash Memory A built-in flash memory that stored EXPRESSBUILDER as standard. You can startEXPRESSBUILDER from it without DVD when pressing key during POST.NEC ESMPRO Standard software for the server management. This consists of several applications formanaging or monitoring.NEC ESMPRO AgentExtensionSoftware for performing the scheduled operations. This works with NEC ESMPROManager.NEC ESMPRO Manager Software for managing multiple servers on network.NEC ESMPROServerAgentServiceSoftware for monitoring the server. This works with NEC ESMPRO Manager. You canchoose Service Mode or Non-Service Mode when installing this software. Service Moderesides as the OS service and Non-Service Mode does not use the OS service toreduce memory, CPU power, and other OS resources.OEM driver A Windows driver for the mass storage device.OS standard installer An installer that stored in Windows installation disc. Use this installer if you want toinstall the OS manually.Offline tools Software that can read or change SEL, SDR, FRU, and other IPMI data. You can startOffline tools when pressing key during POST.PC for Management A computer for managing the server on network. A general Windows/Linux computercan be used as "PC for Management".Product Info Collection Utility Software for collecting several hardware/software statuses or event logs. You caneasily collect the data for the server maintenance by using this software.
