8-18 TroubleshootingProblems with Express SetupExpress Setup can not be used→ Express Setup does not support the installation of Microsoft Windows Server 2003x64 Editions.If you want to perform re-setup, see Appendix D and perform "Manual Setup".Following message appeared when you tried to install Express Setup to the hard disk drivethat has smaller capacity than the specified partition size:The specified partition size has exceeded the capacity of the hard disk.The setup created the partition at the maximum size that can be reserved on the hard disk.Setup will continue the process.OK→ It is not an abnormal condition. Press Enter to continue the installation.The message can not be displayed correctly when copying the files from CD-ROM or checkingCD-ROM:→ Press R. When the message appears again even if you press R, restart the ExpressSetup from the beginning. In case the same result occurred after the restart ofinstallation, contact Maintenance Service Company and ask them to check the DVD-ROM drive.Express Setup terminated and asks to input setup information.→ There are some errors on the specified setup information.Follow the instruction to input the correct value. It is not necessary to cancel theinstallation. On Windows 2000, you might be asked to press Enter again after the lastreboot of the setup.[OK] appears on the [Role of Computer] screen.→ If you click [OK] here, the setup will select the default value of Express Setup for thelater specification to continue the process.The specification of network protocolProtocol : TCP/IP [DHCP Specified]Service : Select sharing Microsoft network files and printer.Client : Microsoft network client.Component : SNMPApplication : NEC ESMPRO AgentRAID utility such as Web-based Promise Array Manager and soon (if the RAID controller is detected)RAID utility such as MegaRAID Storage Manager and so on(if the RAID controller is detected)
