F-16 Installing Windows 2000Installing SCSI Controller Driver (N8103-75)If you utilize SCSI controller driver (N8103-75), install it according to the following procedure:1. Start [Device Manager] from [Start] menu → [Control Panel] → [Administrative Tools]→ [Computer Management].2. Double-click the SCSI Controller driver which Device Manager lists as unknown device.3. Click [Update Driver].4. When the "Update Device Driver Wizard" appears, select "Install from a list or specificlocation [Advanced]" and click [Next].5. Select "Don't search. I will choose the driver to install" and click [Next].6. Click [Have Disk..].– When the floppy disk drive is installed.Insert "Windows 2000 OEM-DISK for NEC EXPRESSBUILDER" into the floppydisk drive, enter "a:\" into "copy manufacturer's file from:" and click [OK].– When the floppy disk drive is not installed.Insert the NEC EXPRESSBUILDER CD-ROM into the DVD-ROM drive, enter":\WINNT\OEMFD\W2K\FD1" into "copymanufacturer's file from:" and click [OK].7. Specify the [Adaptec SCSI Card 29320ALP -Ultra320 SCSI ] and click [Next].The installation of the driver is completed.Restart the system according to the message appeared on the screen.Installing SCSI Controller Driver (N8103-95)If you utilize SCSI controller driver (N8103-95), update your system with NECEXPRESSBUILDER CD-ROM attached to your system.The SCSI controller driver will be installed automatically.
