NEC GT1150 User Manual

Also see for GT1150 Series: Supplementary guide Specifications Installation guide Installation data Specifications

Contents

NEC GT1150 User Manual Manual pdf 37 page image

E – 29When Used with Two or More Switchers (100 Inputs)Up to 100 inputs can be accepted using the NEC ISS-6020 Switcher.How to make connections:1 Connect the REMOTE 1 terminal of the master Switcher to the REMOTE 1 of the projector using theoptional control cable (15p-15p/CTL-6010).2 Next connect the REMOTE 2 terminal of the master Switcher to the REMOTE 1 terminal of the first slaveSwitcher using the same optional control cable as mentioned above. Third, connect the REMOTE 2 termi-nal of the first slave to the REMOTE 1 of the second slave, and the REMOTE 2 terminal of the second slaveto the REMOTE 1 terminal of the third slave (— and the REMOTE 2 of the ninth slave to the REMOTE 1 ofthe tenth slave). Connect all the Switchers with optional control cables.• Select [Advanced Menu] → [Projector Options] → [Switcher Control] → [SW2 Level]. See page E-49 for theinformation in detail.• Refer to the user’s manual accompanying the Switcher.• Cables mentioned are not included with the projector.NOTE:• Be sure to set all the slide switches (S8603) of the Switcher to RS-422 positions. Set the one on the last slave Switcher tothe appropriate position to match the connected equipment such as a personal computer. (RS-422/RS-232C for PC controlof projector)• Set the DIP switch S8601 of the Switcher.PersonalComputerTo REMOTE 1To REMOTE 1 To REMOTE 2To Slot 1To Slot 2To Slot 10To RS232CTo REMOTE 1To REMOTE 2To REMOTE 1To REMOTE 2To REMOTE 1To REMOTE 2To REMOTE 1Slave 1Slave 2Slave 10To Slot 1-10To Slot 1-10To Slot 1-10NOTE: The optional remote control RC-6320 for ISS-6020 will not work correctly in the SW Level 1 or 2 mode.To use the projector with the Switcher ISS-6020 in the Switcher Control mode,* When connecting with the VIDEO INPUT MODULE (6020-VID), set the VIDEO MODE select switch (S3001) to "8". The VIDEO MODE selectswitch is located on the VIDEO INPUT MODULE (6020-VID).NOTE: While in the Switcher Control mode, a video standard is selected at the projector.* If you set the VIDEO MODE select switch (S3001) to "8" with the QUAD DECODER installed in the Switcher ISS-6020, the image will not bedisplayed correctly.In that case, first remove the QUAD DECODER from the Switcher ISS-6020.For more details, contact your dealer.