NEC HT1000 User Manual

Also see for HT1000 Series: Control commands Command guide Command guide Control commands Compatibility chart

Contents

NEC HT1000 User Manual Manual pdf 3 page image

E-3For Europe onlySCART adapter(7N520018)Fire and Shock Precautions1. Ensure that there is sufficient ventilation and that vents are unob-structed to prevent the build-up of heat inside your projector. Allow atleast 3 inches (10 cm) of space between your projector and a wall.2. Prevent foreign objects such as paper clips and bits of paper fromfalling into your projector.Do not attempt to retrieve any objects that might fall into your projec-tor. Do not insert any metal objects such as a wire or screwdriverinto your projector. If something should fall into your projector, dis-connect it immediately and have the object removed by a qualifiedNEC service personnel.3. Do not place any liquids on top of your projector.4. Do not look into the lens while the projector is on. Serious damageto your eyes could result.5. Keep any items such as magnifying glass out of the light path of theprojector. The light being projected from the lens is extensive, there-fore any kind of abnormal objects that can redirect light coming outof the lens, can cause unpredictable outcome such as fire or injuryto the eyes.6. Do not cover the lens with the supplied lens cap or equivalent whilethe projector is on. Doing so can lead to melting of the cap andpossibly burning your hands due to the heat emitted from the lightoutput.7. The projector is designed to operate on a power supply of 100-120or 200-240 V 50/60 Hz AC. Ensure that your power supply fits thisrequirement before attempting to use your projector.8. Handle the power cable carefully and avoid excessive bending.A damaged cord can cause electric shock or fire.9. If the projector is not to be used for an extended period of time,disconnect the plug from the power outlet.10. Do not touch the power plug during a thunderstorm. Doing so cancause elecrical shock or fire.CAUTION1. Do not try to touch the ventilation outlet on the front and side as itcan become heated while the projector is turned on.2. Do no use the tilt-foot for purposes other than originally intended.Misuses such as gripping the tilt-foot or hanging on the wall cancause damage to the projector.3. Enable High-Speed Fan mode if you continue to use the projectorfor consecutive days. (From the Advanced menu, select [ProjectorOptions] → [Setup] → [Page 4] → [High Speed Fan Mode].)4. Do not unplug the power cable from the wall outlet under any one ofthe following circumstances.Doing so can cause damage to the projector:* While the Hour Glass icon appears.* While the message "Please wait a moment." appears. This mes-sage will be displayed after the projector is turned off.* While the cooling fans are running. (The cooling fans continue towork for 90 seconds after the projector is turned off).5. Do not eject the PC card while its data is being accessed. Doing socan damage your PC card data.6. Do not hold the lens part with your fingers. Doing so could pinchfingers or hands causing injury.Lamp Replacement• To replace the lamp, follow all instructions provided on page E-48.• Be sure to replace the lamp when the message "The lamp hasreached the end of its usable life. Please replace the lamp."appears. If you continue to use the lamp after the lamp has reachedthe end of its usable life, the lamp bulb may shatter, and pieces ofglass may be scattered in the lamp case. Do not touch them as thepieces of glass may cause injury.If this happens, contact your NEC dealer for lamp replacement.• Allow a minimum of 90 seconds to elapse after turning off the pro-jector. Then turn off the main power switch, disconnect the powercable and allow 60 minutes to cool the projector before replacingthe lamp.What's in the Box?Make sure your box contains everything listed. If any pieces are miss-ing, contact your dealer.Please save the original box and packing materials if you ever need toship your HT1000 Projector.Lens cap(24FT8661)Remote control(7N900371)Power cable(7N080204: North America)(7N080003: G model)ProjectorSoft carrying case(24BS7111)OFFVIDEOAUTO ADJ.COMPONENT RGBDVIPOWERONS-VIDEOASPECT3D REFORMEFFECTORPICTUREVOLUMEMAGNIFYHELPVIEWERPIC-MUTESLIDEFOLDERSLIDELISTSELECTFREEZEPOSITIONBatteriesSELECTCNACELTERNEEMNUSOURCEAUTO ADJUSTON STAND BYSTATUSPOWERLAMP3D REFORMPC-CARDRGB signal cable(7N520001)Audio cable(7N520014)S-Video cable(7N520015)Composite video cable(7N520016)Component video cable(RCA3-to-RCA3)(7N520017)QuickConnectGuideUser’smanualFor North America onlyRegistration cardLimited warrantyFor Europe onlyGuarantee policyString and rivet(24C05051) (24C04531)