NEC HT1000 User Manual

Also see for HT1000 Series: Control commands Command guide Command guide Control commands Compatibility chart

Contents

NEC HT1000 User Manual Manual pdf 38 page image

E-38Masking Unwanted Area (Blanking)This feature allows you to mask any unwanted area of the screenimage.Adjust the Top, Bottom, Left or Right blanking with the SELECT or button.Adjusting Position and ClockThis allows you to manually adjust the image horizontally and verti-cally, and adjust Clock and Phase.Horizontal/Vertical Position:Adjusts the image location horizontally and vertically using the SE-LECT and buttons. This adjustment is made automatically whenthe Auto Adjust is turned on. See "Auto Adjust" on page E-41 forturning on or off the Auto Adjust feature.Clock .............. Use this item to fine tune the computer image or toremove any vertical banding that might appear. Thisfunction adjusts the clock frequencies that eliminatethe horizontal banding in the image.Press the SELECT and buttons until the band-ing disappears. This adjustment may be necessarywhen you connect your computer for the first time.This adjustment is made automatically when the AutoAdjust is turned on.Phase ............ Use this item to adjust the clock phase or to reducevideo noise, dot interference or cross talk. (This isevident when part of your image appears to be shim-mering.) Use the SELECT and buttons to adjustthe image.Use "Phase" only after the "Clock" is complete. Thisadjustment is made automatically when the Auto Ad-just is turned on.Zoom PositionWhen “4:3” is selected in Screen Type:Selecting ResolutionThis allows you to activate or deactivate the Advanced AccuBlendfeature.Auto ............... Turns on the Advanced AccuBlend feature. The pro-jector automatically reduces or enlarges the currentimage to fit the full screen.Native ............. Turns off the Advanced AccuBlend feature. The pro-jector displays the current image in its true resolu-tion.See "Auto Adjust" on page E-41 for turning on or offthe Auto Adjust feature.NOTE:* When "Resolution" is set to "Native", "3D Reform", "Aspect Ratio" and "Screen"are not available.* While you are displaying an image with higher resolution than the projector'snative resolution “Native” is not available.Selecting Overscan PercentageSelect overscan percentage (0%, 5% and 10%) for signal.NOTE: When "Resolution" is set to "Native", this feature is not available, andthe stored settings and adjustments are invalid.NOTE: When "Stadium" is selected in "Aspect Ratio", this feature is not avail-able.NOTE: The "0%" option may not be available depending upon the input signal.Selecting Video Filter Level (not available for Video, DVI, Compo-nent 15kHz and Viewer)This function reduces video noise.Off .................. The filter is removed.Less ............... The low-pass filter is applied partially.More .............. The low-pass filter is applied fully.Selecting Noise Reduction Level (not available for RGB, DVI andViewer)Select one of the three levels for reducing video noise: Low, Mediumor High.NOTE: The lower the Noise Reduction level, the better the image quality byway of higher video bandwidth.Selecting Signal TypeSelect either the RGB signal type or the Component signal type.RGB ............... RGB signalComponent .... Component signals such as Y/Cb/Cr, Y/Pb/PrNOTE: This feature is available on RGB only. If you do not get a better pictureeven when you set "Signal Select" to "Component" in Setup, set this to "Com-ponent".Picture ManagementThis option allows you to adjust neutral tint for yellow, cyan or magenta.There are 5 factory presets optimized for various types of images, oryou can set 4 user adjustable settings.Video ............. Recommended for regular picture such as TV pro-gramMovie ............. Recommended for movieGame ............. Recommended for playing a video gameGraphic .......... Recommended for graphicssRGB ............. Standard color valuesUser 1-4 ......... User adjustableWhen “16:9” is selected in Screen Type:Move the viewablearea up or downMove the position ofan image up or downZoom or V-Zoom UP DOWNCinema UP DOWNMove the viewablearea up or down Zoom UP DOWNTable of Availability for Zoom PositionFor PC, DVD Progressive, 480p, 480i, 576p, 576iScreen Type4:316:9Aspect RatioNormalNot availableNot availableFullNot availableZoomAvailableAvailableCinemaAvailableV-ZoomAvailableStadiumNot availableFor 720p, 1080i, 1080pScreen Type4:316:9Aspect RatioNormalAvailableNot availableFull ZoomNot availableCinemaAvailableV-ZoomNot availableStadium