NEC LCD3090WQXI-BK-R User Manual

Also see for LCD3090WQXI-BK - MultiSync - 29.8" LCD Monitor: Specifications Specifications

EnglishEnglish-25Figure S.4 Figure S.5Figure S.3Sensor PortUSB SensorSensor port is located atthe back of the monitor.Self CalibrationSimply connect the external USB sensor, and the brightness, white tint and gamma levels are calibrated without the need of acomputer. This feature works for displays requiring RGB calibration and graphical calibration.Before proper self calibration can be performed, display should warm-up for a minimum 30 minutes. If the USB sensor isplugged in before the monitor is warmed up, a warning will appear on-screen (Figure S.3).NOTE: Stand-alone calibration can only be performed using the X-Rite i1 Display Sensor.Refer to the KEY MAP (Figure A) when changing settings during the calibration.Figure S.1 Figure AFigure S.21. Plug-in the USB sensor to the sensor port (Figure S.1).NOTE: Sensor port can only be used for the sensor connection.2. The calibration menu will open automatically and the sensor will begin to initialize. After initializing, the DARK-MEASUREMENT message is displayed. If the DARK-MEASUREMENT message is not displayed,please proceed to step 5.3. Place the USB sensor face down on a non-reflective, opaque surface (i.e. desk or a mouse pad) to measure the blacklevel (Figure S.2). Press “SELECT”.4. After the DARK-MEASUREMENT has succeeded (Figure S.4), press “SELECT” to continue. If DARK-MEASUREMENTfails (Figure S.5), restart the calibration procedure.5. Use “LEFT” or “RIGHT” to select SELF in the MODE selection (Figure S.6). Press “UP” or “DOWN” to move to the nextselection.Use “LEFT” or “RIGHT” to select Color mode in the Color Control System selection (Figure S.6). Press “UP” or “DONW” tomove the next selection.6. Select the target GAMMA: NO CORRECTION, 2.2, OPTION, PROGRAMMABLE, CUSTOM, and SKIP (Figure S.6).NOTE: If CUSTOM is selected, the Gamma Value can be manually changed in intervals of 0.1 at 0.5-4.0. If SKIP isselected, the GAMMA calibration is bypassed reducing calibration time.KEY MAPUP/DOWN: Changes from setting to settingLEFT/RIGHT: Changes the setting selection(ie...SELF or COPY)SELECT: Moves to the next step of calibrationEXIT: Moves back one step of calibration