NEC LT180 User Manual
Also see for LT180 - LT 180 XGA DLP Projector: Supplementary guideControl commandsCommand guideCommand guideControl commands
                                                                         | |
Contents
| 
E-17AUDIO INL R AUDIO OUTL RCOMPONENT OUTY Cb CrPC CONTROLCOMPONENT INCOMPUTER INVIDEO INAUDIO INAUDIO OUT S-VIDEO INRCr/PrCb/PbYLAUDIO INAC INMONITOR OUTAUDIO INCOMPONENT INConnecting Your DVD PlayerAudio cable (not supplied)Audio EquipmentYou can connect your projector to a DVD player with component output or Video output. To do so, simply:1. Turn off the power to your projector and DVD player.2. If your DVD player has the component video (Y,Cb,Cr) output, use a component video cable (RCA 3) toconnect your DVD player to the COMPONENT IN connectors on the projector.For a DVD player without component video (Y,Cb,Cr) output, use the S-Video cable to connect the S-Videooutput of the DVD player to the S-VIDEO Input of the projector.Use an audio cable to connect the audio from your DVD player to your audio equipment (if your DVD playerhas this capability). Be careful to keep your right and left channel connections correct for stereo sound.3. Turn on the projector and DVD player.NOTE: Refer to your DVD player’s owner’s manual for more information about your DVD player’s video output requirements.DVD playerComponent video RCA3 cable(not supplied)Audio cable (not supplied)2. INSTALLATION AND CONNECTIONS |
Related manuals for NEC LT180 - LT 180 XGA DLP Projector
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine