NEC LT180 User Manual
Also see for LT180 - LT 180 XGA DLP Projector: Supplementary guideControl commandsCommand guideCommand guideControl commands
                                                                         | |
Contents
| 
E-18AUDIO INL RAUDIO OUTL RVIDEO OUTS-VIDEO VIDEOPC CONTROLCOMPONENT INCOMPUTER INVIDEO INAUDIO INAUDIO OUT S-VIDEO INRCr/PrCb/PbYLAUDIO INAC INMONITOR OUTS-VIDEO IN AUDIO INVIDEO INConnecting Your VCR or Laser Disc PlayerAudio equipmentUse S-Video or RCA cables to connect your VCR, laser disc player or document camera to your projector.To make these connections, simply:1. Turn off the power to the projector and VCR, laser disc player or document camera.2. Connect one end of your RCA or S-Video cable to the video output connector on the back of your VCR orlaser disc player, connect the other end to the VIDEO IN or S-VIDEO IN on your projector. Use an audio cableto connect the audio from your VCR or laser disc player to your audio equipment (if your VCR or laser discplayer has this capability). Be careful to keep your right and left channel connections correct for stereo sound.3. Turn on the projector and the VCR or laser disc player.NOTE: Refer to your VCR or laser disc player owner's manual for more information about your equipment's video outputrequirements.NOTE: An image may not be displayed correctly when a Video or S-Video source is played back in fast-forward or fast-rewindvia a scan converter.S-Video cable(not supplied)Video cable(not supplied)VCR/ Laser disc player2. INSTALLATION AND CONNECTIONSAudio cable(not supplied) |
Related manuals for NEC LT180 - LT 180 XGA DLP Projector
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine