NEC LT280 User Manual

Also see for MultiSync LT280: Specifications Supplementary guide Control commands Control commands User guide

Contents

NEC LT280 User Manual Manual pdf 3 page image

iImportant InformationSafety CautionsPrecautionsPlease read this manual carefully before using your NEC LT380/LT280 projector and keep the manual handy for futurereference. Your serial number is located on the bottom of your projector. Record it here:CAUTIONTo turn off main power, be sure to remove the plug from power outlet.The power outlet socket should be installed as near to the equipment as possible, and should be easilyaccessible.CAUTIONTO PREVENT SHOCK, DO NOT OPEN THE CABINET.THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.This symbol warns the user that uninsulated voltage within the unit may be sufficient to cause electricalshock. Therefore, it is dangerous to make any kind of contact with any part inside of the unit.This symbol alerts the user that important information concerning the operation and maintenance of thisunit has been provided.The information should be read carefully to avoid problems.WARNING: TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.DO NOT USE THIS UNIT’S PLUG WITH AN EXTENSION CORD OR IN AN OUTLET UNLESS ALL THE PRONGSCAN BE FULLY INSERTED.DOC Compliance Notice (for Canada only)This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.Acoustic Noise Information Ordinance-3. GSGV (for Germany only):The sound pressure level is less than 70 dB (A) according to ISO 3744 or ISO 7779.WARNING TO CALIFORNIA RESIDENTS:Handling the cables supplied with this product, will expose you to lead, a chemical known to the State of Californiato cause birth defects or other reproductive harm. Wash hands after handling.CAUTIONUse of controls or adjustments or performance of procedures other than those specified herein may resultin hazardous radiation exposure.CAUTIONDo not look into the laser pointer while it is on and do not point the laser beam at a person. Serious injurycould result.CAUTIONAvoid displaying stationary images for a prolonged period of time.Doing so can result in these images being temporarily sustained on the surface of the LCD panel.If this should happen, continue to use your projector. The static background from previous images willdisappear.This label is on the side of the remote control. This mark is on the top of the remote control.