453. Convenient Features❾ Controlling the Projector by Using an HTTP BrowserOverviewThe HTTP Server function provides settings and operations for:1. Setting for wired/wireless network (NETWORK SETTINGS)To use wireless LAN connection, the optional USB Wireless LAN Unit is required. (→ page 129)To use wired/wireless LAN connection, connect the projector to the computer with a commercially available LANcable. (→ page 128)2. Setting Alert Mail (ALERT MAIL)When the projector is connected to a wired/wireless network, lamp replace time or error messages will be sent viae-mail.3. Operating the projectorPower on/off, selecting input, volume control and picture adjustments are possible.4. Setting PJLink PASSWORD and AMX BEACON5. Allowing Image Express Utility Lite to be downloaded and copied to your USB memoryThis device uses “JavaScript” and “Cookies” and the browser should be set to accept these functions. The settingmethod will vary depending on the version of browser. Please refer to the help files and the other information providedin your software.Two ways of access to the HTTP server function are available:• Start the Web browser on the computer via the network connected to the projector and enter the followingURL :http:// projector’s IP address> /index.html• Use Image Express Utility Lite contained on the supplied NEC Projector CD-ROM.TIP: The factory setting IP address is [DHCP ON].NOTE:• To use the projector in a network, consult with your network administrator about network settings.• The display’s or button’s response can be slowed down or operation may not be accepted depending the settings of your net-work.Should this happen, consult your network administrator. The projector may not respond if its buttons are repeatedly pressed inrapid intervals. Should this happen, wait a moment and repeat. If you still can’t get any response, turn off and back on the projec-tor.• If the PROJECTOR NETWORK SETTINGS screen does not appear in the web browser, press the Ctrl+F5 keys to refresh your webbrowser (or clear the cache).Preparation before UseConnect the projector to a commercially available LAN cable before engaging in browser operations. (→ page 128)Operation with a browser that uses a proxy server may not be possible depending on the type of proxy server and thesetting method. Although the type of proxy server will be a factor, it is possible that items that have actually been setwill not be displayed depending on the effectiveness of the cache, and the contents set from the browser may not bereflected in operation. It is recommended that a proxy server not be used unless it is unavoidable.
