483. Convenient FeaturesNETWORK SETTINGS• SETTINGSWIRED or WIRELESSSETTING Set for wired LAN or for wireless LAN.APPLY Apply your settings to wired LAN or wireless LAN.DHCP ON Automatically assign IP address, subnet mask, and gateway to the projector from yourDHCP server.DHCP OFF Set IP address, subnet mask, and gateway to the projector assigned by your networkadministrator.IP ADDRESS Set your IP address of the network connected to the projector.SUBNET MASK Set your subnet mask number of the network connected to the projector.GATEWAY Set the default gateway of the network connected to the projector.AUTO DNS ON DHCP server will automatically assign IP address of DNS server connected to theprojector.AUTO DNS OFF Set your IP address of DNS server connected to the projector.Setting for WIRED LANENABLE Turn on wired LAN connectionDISABLE Turn off wired LAN connectionSetting for WIRELESS LAN (with the optional USB Wireless LAN Unit equipped)SIMPLE ACCESS POINT Set the projector for simple access point.MODE Available channels vary depending on the country and region. When you select [IN-FRASTRUCTURE], make sure that the projector and your access point are on thesame channel.CHANNEL Available channels vary depending on the country and region. When you select [IN-FRASTRUCTURE], the access point same with the wireless LAN is selected automati-cally.PROFILE 1/PROFILE 2 Two settings can be set for wireless LAN connection. Select PROFILE 1 or PROFILE2.SSID Enter an identifier (SSID) for wireless LAN. Communication can be done only withequipment whose SSID matches SSID for your wireless LAN.SITE SURVEY Displays a list of available SSIDs for wireless LAN on site. Select an SSID which youcan access.
