NEC MultiSync C431 User Manual

Also see for MultiSync C431: User manual User manual Installation guide

Contents

NEC MultiSync C431 User Manual Manual pdf 30 page image

English-28SettingINPUTDisplayPort Select input signal.HDMI1HDMI2HDMI3VGA (RGB/YPbPr)VIDEOMP Displays images or movies saved in microSD memory card or USB storage device. Please refer to the MediaPlayer setting (See page 19).PICTUREPICTURE MODE Select picture mode: [HIGHBRIGHT], [STANDARD], [sRGB], [CINEMA], [CUSTOM1], [CUSTOM2]. See page 26.BRIGHTNESSBACKLIGHT Adjusts the overall image and background brightness. Press + or - to adjust.NOTE: When MODE1 or MODE2 is selected in ROOM LIGHT SENSING, this function cannot be changed.BRIGHTNESS* 1, * 4 Adjusts the image brightness in relationship to the background. Press + or - to adjust.GAMMA* 1 Select a monitor gamma correction for best picture quality. Selection depends on the desired usage.NATIVE Gamma correction is handled by the LCD panel.2.2 Typical monitor gamma for use with a computer.2.4 Good for video (DVD, etc.)COLOR* 1COLOR*2, *4Except for VGA (RGB) inputAdjusts the color depth of the screen. Press + or - to adjust.COLORTEMPERATURE* 2Adjusts the color temperature of the entire screen. A low color temperature will result in a reddish screen. A highcolor temperature will make the screen bluish. If TEMPERATURE needs further adjustment, the individual R/G/B/levels of the white point can be adjusted. To adjust the R/G/B levels, set CUSTOM as COLOR TEMP selection.NOTE: Predefi ned 6500k is set as picture mode, a color temperature of 6500k is predefi ned so it cannot bechanged.COLOR CONTROL* 2 Adjusts the hue of the Red, Yellow, Green, Cyan, Blue and Magenta.HUE* 4MP, VIDEO inputs onlyAdjusts the hue of the screen. Press + or - to adjust.CONTRAST*1, *2, *4 Adjusts the image brightness in relationship to the input signal. Press + or - to adjust.SHARPNESS*2, *4Except for VGA (RGB) inputAdjusts the crispness of the image. Press + or - to adjust.ADJUSTAUTO SETUPVGA (RGB) input onlyAutomatically adjusts Screen Size, H position, V position, Clock and Phase.AUTO ADJUSTVGA (RGB) input onlyPlease use ON normally. When you select OFF, H Position, V Position and Phase are not adjusted automaticallywhen new timing is detected.H POSITION* 3VGA (RGB), VGA (YPbPr) inputs onlyControls the horizontal position of the image within the Display area of the LCD.Press + to move right. Press - to move left.V POSITION* 3VGA (RGB), VGA (YPbPr) inputs onlyControls the vertical position of the image within the Display area of the LCD.Press + to move up. Press - to move down.CLOCKVGA (RGB) input onlyPress + to expand the width of the image on the right of the screen.Press - to narrow the width of the image on the left.PHASEVGA (RGB) input onlyAdjusts the visual “noise” on the image.*1: This function is not available when sRGB is selected at PICTURE MODE.*2: This function is not available by the selection at HDMI/DisplayPort MODE.*3: This function is not available when 1:1 is selected as ASPECT.*4: This function is not available for still image by MP input.