NEC MultiSync C431 User Manual

Also see for MultiSync C431: User manual User manual Installation guide

Contents

NEC MultiSync C431 User Manual Manual pdf 9 page image

English-7EnglishAttaching Mounting AccessoriesThe monitor is designed for use with the VESA mountingsystem.1. Attach Mounting AccessoriesBe careful to avoid tipping the monitor when attachingaccessories.VESA Mounting Interface (M6)300 mm300 mmMounting accessories can be attached with the monitor inthe face down position. To avoid damaging the front face,place the protective sheet on the table underneath the LCDmonitor. The protective sheet was wrapped around the LCDmonitor in the original packaging. Make sure there is nothingon the table that can damage the monitor.When using mounting accessories other than NEC compliantand approved, they must comply with the VESA Flat DisplayMounting Interface Standard (FDMI).NOTE: Prior to installation, be sure to place the monitoron a fl at area with adequate space.2. Using Wall Mount AdapterIf the mounting accessory interferes with ventilation hole, usethe included wall mount adaptors (Dia. 14 mm) and screws.If the adaptor screws are too long, include a washer toreduce the depth. Washer not included.Wall mountadapter screwWasherMounting bracketUnitWall mount adapter (Dia. 14 mm)10-12 mm18 mmPictured mounting solutions may not be available in somecountries.3. Installing and removing the optionaltable top standCAUTION: Installing and removing the stand must be doneby two or more people.For installation follow the instructions included with thestand or mounting equipment. Use only those devicesrecommended by the manufacturer.NOTE: ONLY use screws which are supplied with theoptional table top stand.When installing, do not put your hands on themonitor or apply force. The monitor may becomedistorted.When installing the LCD monitor stand, handle the unit withcare to avoid pinching your fi ngers.NOTE: Use the ST-401. Please refer to the ST-401user’s manual for more detail.Height adjustment1. The lines on the stand pole are indicators of the heightadjustment. Please adjust the pipe to the lines.C551 High/LowC501C431PipeAdjust the pipe to a line. Stand pole2. Please install the stand pole and the pipe with includedscrews. Please screw the two screw holes at the pipe.PipeStand poleNOTE: Installing the monitor at the wrong height cancause tipping.Please install your monitor at proper height.