NEC MultiSync EA245WMi User Manual

Also see for MultiSync EA245WMi: User manual User manual User manual

English-14ECO MODEDecreases the amount of power consumption by reducing the brightness level.OFF: No function.1: Sets brightness variable range from 0% to 60%.This setting can adjust brightness to a range in which power is reduced by 20% compared to the maximum brightnesssetting.2: Sets brightness variable range from 0% to 30%.This setting can adjust brightness to a range in which power is reduced by 35% compared to the maximum brightnesssetting.When this function is set to ON, a CARBON FOOTPRINT bar will appear alongside the brightness adjustment bar.NOTE: This function is disabled when DV MODE is set to DYNAMIC.This function is disabled when Color Control System is set to DICOM SIM.To enter the ECO MODE, touch ECO.If you touch ECO, the setting changes [1] [2] [OFF] [1].AUTO BRIGHTNESSOFF: No function.ON (AMBIENT LIGHT): Automatically adjusts the brightness to the optimal setting by detecting the brightness level ofthe environment*1.*1: Please refer to page 26 for full “Auto Brightness” information.NOTE: This function is disabled when DV MODE is set to DYNAMIC.This function is disabled when Color Control System is set to DICOM SIM.BLACK LEVELAdjusts the black level.OFF MODE SETTINGThe Intelligent Power Manager allows the monitor to enter into power saving mode after a period of inactivity.The OFF MODE has two settings:OFF: Monitor enters into power saving mode automatically when the input signal is lost.ON: Monitor enters into power saving mode automatically when the amount of surrounding light goes below the leveldetermined by you. The level can be adjusted in OFF MODE sensor setting.When in power saving mode, the LED on the front of the monitor becomes dark blue. When in power saving mode,touch any of the front keys, except for POWER and INPUT, to return to normal.When the amount of surrounding light returns to normal levels, the monitor will automatically return to normal mode.SENSOR SETTING (OFF MODE SETTING)Adjusts threshold level of ambient light sensor for detected dark condition and shows current sensor measurementresult.START TIME (OFF MODE SETTING)Adjusts wait time to enter into to a lower power consumption level when ambient light sensor detects dark condition.HUMAN SENSINGThe sensor detects the movement of a person by using the HUMAN SENSING function. The HUMAN SENSING hasthree settings:OFF: No human sensing.1 (LIGHT): After it is detected that there is no person after a period of time, the monitor shifts to low brightness modeautomatically to reduce the power consumption. When a person comes near the monitor again, the monitor willautomatically return to normal mode. START TIME adjusts the wait time to react.2 (DEEP): After it is detected that there is no person, the monitor shifts to power saving mode automatically to reducethe power consumption. When a person comes near the monitor again, it resumes from the power saving mode.NOTE: Detects a person within about 1.5 m from the monitor.