NEC MultiSync EA245WMi User Manual

Also see for MultiSync EA245WMi: User manual User manual User manual

English-18POWER SAVE TIMERPOWER SAVE TIMER allows the monitor to turn off automatically after continuing power saving mode for 2 hours.LED BRIGHTNESSYou can adjust the blue LED brightness.DDC/CIThis function allows the DDC/CI function ON or OFF.USB POWERSelects a power relation of USB.AUTO: Power is supplied to USB downstream port depending on related power condition.ON: Power is always supplied to USB downstream port even when in power save mode or power OFF.NOTE: Power consumption depends on connected USB even when a monitor’s power is off.180° ROTATESelect to display the image for 0° or 180°.FACTORY PRESETSelecting Factory Preset allows you to reset all OSD control settings back to the factory settings except Language andOSD Lock Out. Individual settings can be reset by touching the “ECO/RESET” key.MENU ToolsLANGUAGESelects the language used by the OSD.OSD TURN OFFThe OSD menu will stay on as long as it is in use. You can select how long the monitor waits after the last key touch toshut off the OSD menu. The preset choices are 10-120 seconds by 5-second increments.OSD LOCK OUTThis control completely locks out the access to all OSD control functions except for Brightness, Contrast and Volume.To activate the OSD Lock Out function, enter the OSD menu, select OSD LOCK OUT, then touch “SELECT” andRIGHT simultaneously. To deactivate, touch “SELECT” and LEFT simultaneously.HOT KEYWhen this function is activated BRIGHTNESS and VOLUME can be adjusted without entering the OSD menu by usingthe front keys.ON: The “ECO” touch key on the bezel is enabled and can toggle among ECO settings.The Up/Down key adjusts the VOLUME and the BRIGHTNESS level.OFF: The HOT KEY function for “ECO” and “Up/Down” functions are disabled.SIGNAL INFORMATIONIf you select “ON”, monitor displays “VIDEO INPUT MENU” after changing the input.If you select “OFF”, monitor doesn’t display “VIDEO INPUT MENU” after changing the input.SENSOR INFORMATIONIf you select “ON”, monitor displays “HUMAN SENSOR ON” message. If you select “OFF”, monitor doesn’t display“HUMAN SENSOR ON” message.KEY GUIDEIf you select “ON”, the Key Guide appears on screen when the OSD menu is accessed.