Specifications cont.12Monitor MultiSync® FE950™ NotesSpecifications MonitorPicture Tube Diagonal: 19 inch/49.5 cm 90° deflection, 0.25 - 0.27 mm (variable)Viewable Image Size: 18 inch/45.8 cm grille pitch, medium short persistenceRadius: 57800 mm phosphor, aperture grille CRT, multi-layered,anti-static screen coating, semi-dark-tintscreen, and OptiClear® screen surface.Input Signal Video: ANALOG 0.7 Vp-p/75 OhmsSync: Separate sync. TTL LevelHorizontal sync. Positive/NegativeVertical sync. Positive/NegativeComposite sync. (Positive/Negative) (TTL Level)Display Colors Analog input: Unlimited number of Colors Depends on display card used.Synchronization Horizontal: 31 kHz to 96 kHz AutomaticallyRange Vertical: 55 Hz to 160 Hz AutomaticallyResolutions Supported 640 x 480 @ 60 to 160 Hz Some systems may not supportResolution based on horizontal and 800 x 600 @ 55 to 152 Hz all modes listed.vertical frequencies only 832 x 624 @ 55 to 146 Hz1024 x 768 @ 55 to 119 Hz1152 x 870 @ 55 to 104 Hz1280 x 1024 @ 55 to 89 Hz ..................... NEC cites recommended resolution at1600 x 1200 @ 55 to 76 Hz 85 Hz for optimal display performance1792 x 1344 @ 55 to 68 HzActive Display Area Horizontal: 356 mm/14.0 inches Dependent upon signal timing used,(Factory Setting) Vertical: 267 mm/10.5 inches and does not include border area.Active Display Area 366 mm/14.4 inches Dependent upon signal timing used,(Full Scan) 275 mm/10.8 inches and does not include border area.Power Supply AC 100 – 120 V/220 - 240 V, 50/60 HzCurrent Rating 1.2A @ 100 – 120 V / 0.6A@ 220-240 VDimensions 442 mm (W) x 456 mm (H) x 447 mm (D)17.4 inches (W) x 18.0 inches (H) x 17.6 inches (D)Weight 24.3 kg53.6 lbsEnvironmental ConsiderationsOperating Temperature: +10°C to +35°C/+50°F to +90°FHumidity: 30% to 80%Altitude: 3,000 m/10,000 FeetStorage Temperature: -20°C to +60°C/-4°F to +140°FHumidity: 10% to 90%Altitude: 13,700 m/45,000 FeetNOTE: Technical specifications are subject to change without notice.78135291.wpc 11/24/99, 8:03 AM14