NEC MultiSync FE1250 FE1250 FE1250 User Manual

NEC MultiSync FE1250 FE1250 FE1250 User Manual Manual pdf 7 page image

5ControlsOSM™ (On-Screen Manager) control buttons on the front of the monitor functionas follows:Main Menu Sub-MenuEXIT Exits the OSM menu. Exits to the OSM controlsmain menu.CONTROL Moves the highlighted Moves the highlighted area/ area up/down to select up/down to select one of theone of the controls. controls.CONTROL Moves the highlighted Moves the bar in the – or +–/+ area left/right to select direction to decrease orone of the controls. increase the adjustment.PROCEED Has no function. Only executes controlor enters sub, sub-menu.RESET Resets all the controls within Resets the highlighted controlthe highlighted menu to the factory setting.to the factory setting.NOTE: When RESET is pressed in the main and sub-menu, a warningwindow will appear allowing you to cancel the reset function.When OSM controls are activated, icons are displayed at the top of the menu.If an arrow (Ô) is displayed in a sub-menu, it indicates further choices areavailable. To enter a sub, sub-menu, press PROCEED.Brightness/Contrast ControlsBrightness: Adjusts the overall image and background screen brightness.Contrast: Adjusts the image brightness in relation to the background.Degauss: Eliminates the buildup of stray magnetic fields which alter the correctscan of the electron beams and affect the purity of the screen colors, focus andconvergence. When activated, your screen image will jump and waver a bit asthe screen is demagnetized.Caution: Please allow a minimum of 20 minutes to elapse between uses of theDegauss Control.Size and Position ControlsAuto Adjust: Automatically adjusts the horizontal and vertical size andposition settings for applicable signal timings.Left/Right: Moves the image horizontally (left or right).Down/Up: Moves the image vertically (up or down).Narrow/Wide: Decreases or increases the horizontal size of the image.Short/Tall: Decreases or increases the vertical size of the image.78135291.wpc 11/24/99, 8:03 AM7