NEC MultiSync LCD1770V User Manual

Also see for LCD1770NX - MultiSync - 17" LCD Monitor: Specifications Specifications User manual Specifications Brochure & specs

1CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROMWALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE POWERCORD FROM THE AC OUTLET.DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTSINSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.This symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to causeelectric shock. Therefore, it is dangerous to make any kind of contact with any part inside this unit.This symbol alerts the user that important literature concerning the operation and maintenance of thisunit has been included. Therefore, it should be read carefully in order to avoid any problems.WARNINGCAUTIONCanadian Department of Communications Compliance StatementDOC: This Class B digital apparatus meets all requirements of the CanadianInterference-Causing Equipment Regulations.C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulationsaccording to CAN/CSA C22.2 No. 60950-1.FCC Information1. Use the attached specified cables with the MultiSync ® LCD1770V™, LCD1770NX™,and LCD1770NXM™ (L174F) color monitor so as not to interfere with radio andtelevision reception.(1) Please use the supplied power cord or equivalent to ensure FCC compliance.(2) Please use the supplied shielded video signal cable.Use of other cables and adapters may cause interference with radio andtelevision reception.2. This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates, uses, and can radiate radio frequency energy, and, if not installedand used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, the useris encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiveris connected.• Consult your dealer or an experienced radio/TV technician for help.If necessary, the user should contact the dealer or an experienced radio/television technicianfor additional suggestions. The user may find the following booklet, prepared by the FederalCommunications Commission, helpful: ”How to Identify and Resolve Radio-TV InterferenceProblems.“ This booklet is available from the U.S. Government Printing Office, Washington,D.C., 20402, Stock No. 004-000-00345-4.TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USETHIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGSCAN BE FULLY INSERTED.REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICINGTO QUALIFIED SERVICE PERSONNEL.LCD17PISAManual080604.p65 8/6/04, 5:14 PM1