3LAST: If “LAST” is selected as the VIDEO DETECT option, theneach time a new input source is detected, the monitor will automatically displaythe new signal.NONE: The monitor will only search other input ports while the power is on.OFF TIMER: Monitor will automatically power down after a user-determined lengthof time passes. Before powering off, a message will appear on the screen askingthe user if they want to delay the turn off time by 60 minutes. Press any OSMbutton to delay the turn off time.IPM: The Intelligent Power Manager allows the monitor to enter into a power savingmode after a period of inactivity. The IPM has three settings.OFF: Monitor does not go into power save mode when the input signal is lost.STANDARD: Monitor enters power save mode automatically when the inputsignal is lost.OPTION: Monitor enters power save mode automatically when the amount ofsurrounding light goes below the level that is determined by the user. The levelcan be determined in Tag 7 of the Advanced OSM Control menu.When in power save mode, the LED on the front of the monitor blinks amber.While in power save mode, push any of the front buttons, except for POWER andSELECT to return to normal operation.When the amount of surrounding light returns to normal levels, the monitor willautomatically return to normal mode.COLORCOMP: This function electronically compensates for the slight variations inthe white uniformity level, as well as for deviations in color that may occur throughoutthe display area of the screen. These variations are characteristic of LCD paneltechnology. This function improves the color and evens out the luminance uniformityof the display.NOTE: Using the COLORCOMP feature reduces the overall peak luminance ofthe display. If greater luminance is desired over the uniform performance of thedisplay, then COLORCOMP should be turned off.MENU ToolsLANGUAGE: OSM control menus are available in eight languages.OSM LEFT/RIGHT: You can choose the location where the OSM appears onyour screen. The LEFT/RIGHT submenu moves the OSM horizontally.OSM DOWN/UP: You can choose the location where the OSM appears on yourscreen. This DOWN/UP submenu moves the OSM vertically.Controls – continued