29CableComp AdjustmentCableComp allows the monitor to correct slight deviations in the image that mayoccur when using a long signal cable.To perform the long cable compensation adjustment, use the following steps:Set the Auto Adjust Level to “DETAIL” in the Advanced OSM Control menu (seepage 8).To enter the Advanced OSM• Turn off your monitor.• Turn on your monitor by pressing the “POWER” and “SELECT” buttonssimultaneously.• Press one of the following OSM buttons to enter the Advanced OSM Controlmenu: EXIT, LEFT, RIGHT, UP, or DOWN.To exit the Advanced OSM Control Menu• Turn off and restart your monitor.Perform “AUTO ADJUST” by using the OSM function.• Press select to adjust.• For additional information on usercontrols and software utilities, visit ourwebsite at www.necdisplay.com.SIMPLE XFULL XDETAIL"Size" "Fine""Position"OOOXOO O1 seconds1.5 seconds5 secondsTime"Contrast" Long cable capability *1Black Level,O: Automatic adjustment is performed.X: Automatic adjustment is not performed.*: Black level, RGB sharpness, RGB delay and RGB position can be adjusted using the Long Cable Software.To download the software, please visit www.necdisplay.com.Using the CableComp™ function