NEC MultiSync MD213MC Installation And Maintenance Manual

Also see for MD212MC - MultiSync - 21.3" LCD Monitor: Specifications Specification Specifications Specifications Specifications

English-10ControlsThe OSD (On-Screen Display) control buttons are located on the back of themonitor:To access OSD menu, press the EXIT button. To change signal input, press the SELECT button.NOTE: OSD must be closed in order to change signal input.SETTING OSD LANGUAGE• Set the OSD language before using OSD functions.• To access the “LANGUAGE SELECTION” menu, press control key (LEFT/RIGHT or UP/DOWN or EXIT).• Press the LEFT/RIGHT or UP/DOWN buttons to select the desired OSD language.• To exit from this OSD menu, press EXIT button.NOTE: Setting the OSD language is only necessary upon initial setup. The OSD language will stay the same until changedby the user.Indicates that the power is on.Resets the OSD back to factory settings.NOTE: With no input signal on the screen, press RESET button for at least 3 seconds todisplay the visual inspection (grayscale) drawing and check the display performance.Enters the OSD Control menu. Enters OSD sub menus.Changes the input source when not in the OSD Control menu.Navigates up or down through the OSD Control menu.Navigates to the left or right through the OSD Control menu.Access OSD menu. Exits the OSD sub menu. Exits OSD Control menu.Detects the level of ambient light, allowing the monitor to make adjustments to varioussettings. Do not cover this sensor.Detects luminance changes over time. Used for standalone and network controlledcalibrations and conformance tests.For optional external sensor used for self calibration and copy calibration.The Key Guide appears on screen when the OSD control menu is accessed.The Key Guide will rotate when the OSD control menu is rotated.1 LED2 RESET3 SELECT4 UP/DOWN5 LEFT/RIGHT6 EXIT7 AMBIENT LIGHTSENSOR8 FRONT SENSOR9 SENSOR PORT10 KEY GUIDE12345678109