NEC MultiSync P212 User Manual

Also see for MultiSync P212: User manual

English-15EnglishOSD LOCK OUTThis control completely locks out access to all OSD control functions. When attempting to activate OSD controls whilein the Lock Out mode, a screen will appear indicating the OSD controls are locked out.There are three types of OSD LOCK OUT:OSD LOCK OUT with no control: To activate the OSD Lock Out function, press SELECT, then “RIGHT” button andhold down simultaneously. To deactivate the OSD Lock Out, press SELECT, then “RIGHT” button and hold downsimultaneously while in the OSD menu. No controls can be adjusted while in the lock out mode.OSD LOCK OUT with BRIGHTNESS and VOLUME control: To activate the OSD Lock Out function, press SELECT,then “DOWN” and “LEFT” buttons and hold down simultaneously. To deactivate the OSD Lock Out, press SELECT,then “DOWN” and “LEFT” buttons and hold down simultaneously while in the OSD menu. BRIGHTNESS and VOLUMEcan be adjusted while in this lock out mode.CUSTOM: Refer to the Advanced OSD Menu.OSD TRANSPARENCYAdjusts the transparency of the OSD Menu.OSD COLORAdjusts the color of the OSD Menu. “Tag window frame color”, “Item select color” and “Adjust window frame color” canbe changed to Red, Green, Blue, or Gray.RESOLUTION NOTIFIERIf ON is selected, a message will appear on the screen after 30 seconds, notifying you that the resolution is not theoptimal resolution.HOT KEYYou can adjust the VOLUME directly. When this function is set to ON, you can adjust the VOLUME with “LEFT” or“RIGHT”, while the OSD menu is off. The standard OSD can be accessed with the EXIT button. When this function isset to OFF, some buttons are disabled (see page 11).FACTORY PRESETSelecting FACTORY PRESET allows you to reset all OSD control settings back to the factory settings except forVIDEO DETECT, LANGUAGE, OSD LOCK OUT, OSD COLOR and HOY KEY. Individual settings can be reset byhighlighting the control to be reset and pressing the RESET button.ECO InformationCARBON SAVINGS: Displays the estimated carbon savings information in kg.CARBON USAGE: Displays the estimated carbon usages information in kg.This is the arithmetic estimation, not actual measurement value.This estimation is based without any options.COST SAVINGS: Displays the electricity cost savings in balance.CARBON CONVERT SETTING: Adjusts the carbon footprint factor in the carbon saving calculation. This initial settingis based on the OECD (2008 Edition).CURRENCY SETTING: Displays electricity pricing in 6 currency units.CURRENCY CONVERT SETTING: Displays electricity savings in kW/hour (US Currency is default).NOTE: This model’s initial setting is “Currency = US$” and its Currency Convert setting = $0.11.This setting can be changed by using the ECO information menu.If you want to use the French setting, please refer to steps below:1. Open menu by pressing the Menu button and select the ECO information menu using the “LEFT” or“RIGHT” button.2. Select CURRENCY SETTING item pressing the “UP” or “DOWN” button.3. The French currency unit is Euro ( ). You can adjust currency setting to Euro icon ( ) from US dollar ($)using the “LEFT” or “RIGHT” button in Current setting item.4. Select CURRENCY CONVERT SETTING item using the “UP” or “DOWN” button.This initial Euro ( ) setting is Germany of OECD (2007 Edition).Please check receipt of French’s electricity prices or OECD data for French.French of OECD (2007 Edition) was 0.12.5. Adjust CURRENCY CONVERT SETTING item using the “LEFT” or “RIGHT” button.