NEC MultiSync P212 User Manual

Also see for MultiSync P212: User manual

English-23EnglishFACTORY PRESET* 1 Selecting FACTORY PRESET allows you to reset all OSD control settings back to thefactory settings. Highlighting the control to be reset and pressing the RESET button canreset individual settings.Tag8 VOLUME Controls the volume of the speakers or headphones.To mute the sound output, press the “RESET” button.SOUND INPUT(HDMI, DisplayPortinputs only)Selects sound input port, HDMI or DisplayPort.HDMI input: HDMI or ANALOG.DisplayPort input: DP or ANALOG.AUDIO DELAY For synchronizing of sounds and images, delay the audio output timing.DP EDID SOUNDSELECTWhen OFF is selected, DisplayPort signal will not emit any sound.You can select “OFF”, when DisplayPort signals do not optimize on the native resolution.Tag9 TILE MATRIX The TILE MATRIX feature allows one image to be displayed over multiple screens.This feature can be used with up to 25 monitors (5 vertical and 5 horizontal). Using TILEMATRIX requires the PC output signal be sent through a distribution amplifi er to eachindividual monitor.H MONITOR: Select the number of horizontal displays.V MONITOR: Select the number of vertical displays.MONITOR No: Select a position to expand the screen.TILE COMP: Works in tandem with TILE MATRIX to compensate for the width of the tilebezels in order to accurately display the image.Tile Comp with 4 monitors (black area shows monitor frames):monitor1 monitor2monitor3 monitor4monitor1 monitor2monitor3 monitor4Tile Comp ONTile Comp OFFTagA ROTATION OSD:LANDSCAPE: Display the OSD with landscape mode.PORTRAIT: Display the OSD with portrait mode.PICTURE:OFF: The window image is not rotated.ON: The window image always rotated.DDC/CI This function allows the DDC/CI function enable or DISABLE.SCREEN SAVER Use the SCREEN SAVER to reduce the risk of image persistence.MOTION (Default OFF): Screen image moves periodically in 4 directions in order toreduce the risk of image retention.Timing for MOTION can be set so the screen image moves in intervals from every10 to 900 seconds. Timing is set in 10-second increments.OPTION (Default REDUCED): There are two optional selections.REDUCED: Screen image is reduced to 95% size and is moved periodically in4 directions. Screen may appear slightly less sharp than normal. The full image appearson the display.NOTE: Some input signals may not be supported by REDUCED.FULL: Screen image is set to FULL and is moved periodically in 4 directions. Screenimage goes outside of the display area in the direction that it shifts so that a portion of theimage may appear to be cut off.NOTE: SCREEN SAVER works when ENABLE is OFF in TILE MATRIX.BLANK SIGNAL SKIP Skip no signal inputs when you change input signal with INPUT button.*1 This item does not reset by FACTORY PRESET (Tag7).